Tuning for the first time out

6.5cc on 16%Nitro

Duration : 0:0:25

Technorati Tags: 7146

9 Responses

1. BKoffthehook Says:
   January 25th, 2010 at 11:58 am

   Na no v8 , just 6.5 …
   Na no v8 , just 6.5 ANGRY CC’s

2. rideyz3 Says:
   January 25th, 2010 at 11:58 am

   was that a v 8?!?!? …
   was that a v 8?!?!?!?!?!

3. BKoffthehook Says:
   January 25th, 2010 at 11:58 am

   There are so many …
   There are so many different ways to go now, Mono,cat , hydro & Rigger- Nitro or Electric?
   You can get into this with a China made ready to run boat for about 300-600$Au but this one is all hand made, It will cost you about $900 + 14 months worth of time = A lot

4. naruto101187 Says:
   January 25th, 2010 at 11:58 am

   how much these …
   how much these six toys cost??

5. robosnsyrians Says:
   January 25th, 2010 at 11:58 am

   actually i suppose …
   actually i suppose yr right wot happens if u run out of fuel or stall or do u have a thing on controller which tells u how much fuel u have got left

6. BKoffthehook Says:
   January 25th, 2010 at 11:58 am

   More to it than it …
   More to it than it would seem, you have to run about 1/2 the prop size due to the increased load,you need an out side supply of water due to there being no water speed at the rudder to pick up for cooling. This gets the boat tuned really well before i take it out ,more time on the lake and less time stuffing around with mixtures.

7. robosnsyrians Says:
   January 25th, 2010 at 11:58 am

   nice lol not vry …
   nice lol not vry hard 2make a boat dyno

8. aeromarine26 Says:
   January 25th, 2010 at 11:58 am

   Looking good, how …
   Looking good, how about some on water running videos….

9. sslusshy Says:
   January 25th, 2010 at 11:58 am

   Nice sounds like …
   Nice sounds like its tuned pretty good. How are boat rc motor cooled?

Leave a Comment