25 thoughts on “Miss Budweiser RC Hydro Nitro Boat

  1. sounds lean….. if …
    sounds lean….. if that is your stock glow plug, it is suspect to cause stalling…. also it may be stalling because your idle screw is to far out and the carb is shutting to much…

  2. i was thinkin of …
    i was thinkin of gettin 1 but wot if da boat runs out of fuel on ntiro theres no warnin dey just cut out at least on electric u no roughly wen

  3. well if your me and …
    well if your me and have the traxxas nitro vee it has RTS..which is an electric backup motor, but..when i didnt have that me and my frend installed magnets to the fronts of our boats, capable of holding twice the weight of our boats, and we only ran them together

  4. it doesnt idle …
    it doesnt idle because the drag on ur prop is to much for the engine to turn while idleing so low so it hold the engine back and it just shutts off.

  5. If the engine …
    If the engine stalls while accelerating it is the low speed needle adjusting that are set too lean, if it stalls while on full throttle your high speed needle is set to lean.

  6. is there a idle …
    is there a idle speed screw like on the 2.5 and 3.3 traxxas motor if so set idle there also tie a string on boat and the other end to something heavy enough that it want drag it off putt it in the water . and test you settings in the water and adjust you carb settings when running

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>